Induction Noise Resistance Simulator

INR 60

The INR 60 inductive noise immunity Tester is developed according to the Toyota TSC0502G Fig.22.

Request a Quote Add to Compare Add to Quote List

Introduction

The INR 60 inductive noise immunity Tester is developed according to the Toyota TSC0502G Fig.22. It simulates the high-voltage noise waveform generated in a vehicle and can be connected to a remote PC via Ethernet to print a test report.

Features

> 5.7-inch color touch screen front panel operation

> Built in standard waveform, convenient and fast to operate

> Ethernet and RJ45 interfaces, used for PC remote control and test reports printing

> PC control software AutoLab is optional

> The indicator light displays frequency selection for easy differentiation.

Standards

Other Standards

Toyota TSC0502G

Application Areas

Automotive Electronics

Specification

Technical Parameters

Test Voltage	100 V ~ 600 V (0% ~ 10%) @ 0.1 MHz, 5 MHz, 10 MHz
	100 V ~ 500 V (0% ~ 10%) @ 100 MHz
	100 V ~ 600 V (0% ~ 10%) @ 30 MHz Note: 200 V (0% ~ 5%)
Pulse Waveform	Damped oscillatory wave
Pulse Oscillation Frequency	± 10%: 0.1 MHz, 5 MHz, 10 MHz, 30 MHz
Pulse Oscillation Frequency	±25%: 100 MHz
Rise Time (10% ~ 90%)	≤50 ns @ 0.1 MHz;
Rise Time (10% ~ 90%)	≤10 ns @ 5 MHz, 10 MHz, 30 MHz, 100 MHz;
Attenuation Ratio	Vp5/Vp1 ≥ 30% @0.1 MHz, 5 MHz, 10 MHz, 30 MHz
	Vp3/Vp1 ≥ 30%@100 MHz
	Resistive load: ≥1,000 Ω
Source Output Impedance	50 Ω
Polarity	Positive
Repetition Time	100 ms @0.1 MHz;
Repetition Time	10 ms @5 MHz, 10 MHz, 30 MHz, 100 MHz
Duration	1 ~ 999 s
Test Interval	1 ~ 9,999 s
Counter	1 ~ 9,999
Trigger Mode	Automatic, manual, external trigger
Output Port	MC insulated port (Note: Calibration for pulses of 100MHz, a coaxial attenuator is needed. Attenuation ratio 1000:1, input impedance1000 Ω, frequency 400 MHz or above; Calibration for pulses with frequency other than 100 MHz, a differential probe with a bandwidth of 200 MHz or higher is needed; Oscilloscope: 400 MHz or higher

General Parameters

Accessories

Standard Accessories

Power Cord, Test Cable, Grounding Wire, Fuse, User Manual

Optional Accessories

Request a Quote

Interested in our products? Leave us a message, and our team will get back to you soon!

Prev: Supply Circuit Positive Surge Simulator Next: Charging Station Adapter Box Back to list

Display Screen	5.7-inch TFT touch screen
Working Power	AC 110 V/220 V, 土10%, 50 Hz/60 Hz
Power Consumption	Max. 300 W
Fuse	6 A
Communication Mode	Ethernet LAN
Trigger Mode	Automatic, manual, external trigger
External Trigger Input	BNC, 5 V TTL
CRO Trigger Input	BNC, 5 V TTL
Run Control Input	BNC, 5 V TTL
Grounding Method	Flat grounding wire
Dimension	6U rack 550 (W)450 (H)280 (D) mm
Weight	Approx. 22 kg
Ambient Temperature	15℃ ~ 35℃
Relative Humidity	45% ~ 75%
Atmospheric Pressure	86 kPa ~ 106 kPa

Induction Noise Resistance Simulator INR 60

Induction Noise Resistance Simulator

INR 60