Common-Mode Conducted Disturbances Simulator

CDS 300

The CDS 300 is a common-mode conducted disturbance simulator with a frequency range of 0 Hz (DC) to 165 kHz and a max. output voltage of 300 V.

Download Datasheet

Request a Quote Add to Compare Add to Quote List

Introduction

The CDS 300 is a common-mode conducted disturbance simulator with a frequency range of 0 Hz (DC) to 165 kHz and a max. output voltage of 300 V.

The generator is controlled by CoreLab software, enabling quick and convenient functional tests

It complies with IEC/EN 61000-4-16, IEC 61000-4-19, IEC/EN 60255-22-7 and JJF 1245.4-2019...

Naming Rules:

naming rules.png

Features

> Integrated design

> Frequency range: DC ~ 165 kHz

> Test voltage up to 30 V from 10 Hz to 165 kHz; up to 300 V at DC, 16^⅔ Hz,50 Hz and 60 Hz

> Frequency step: linear, logarithmic, fixed

Standards

IEC Standards

GB/T Standards

GB/T 14598.19

EN Standards

Other Standards

JJF 1245.4

View All Standards

Application Areas

Specification

Technical Parameters

Output Specifications (Continuous Mode)
Test Frequency	DC, 16^⅔ Hz, 50 Hz, 60 Hz
Open-circuit Voltage	1 V ~ 30 V
Signal Level	(0.1-30) V RMS or DC
Test Level 1	1 V, continuous
Test Level 2	3 V, continuous
Test Level 3	10 V, continuous
Test Level 4	30 V, continuous
Output Impedance	50 Ω ±10%
Total Harmonic Distortion	< 10% (sine wave)
DC Ripple	< 5%
Output Specifications (Short-term Mode)
Test Frequency	DC, 16⅔ Hz, 50 Hz, 60 Hz
Open-circuit Voltage	10 V ~ 330 V
Signal Level	(1~330) V RMS or DC
Test Level 1	10 V, duration 1 s
Test Level 2	30 V, duration 1 s
Test Level 3	100 V, duration 1 s
Test Level 4	300 V, duration 1 s
Output Impedance	50 Ω ±10%
Phase Sync	0°±5%
DC Ripple	< 5%
Rise/Fall time	1 μs ~ 5 μs
Output Specifications (15 Hz - 165 kHz)
Frequency Range	10 Hz~165 kHz
Signal Level	(0.1~30) V RMS
Test Level 1	1 V - 0.1 V - 1 V
Test Level 2	3 V - 0.3 V - 3 V
Test Level 3	10 V - 1 V - 10 V
Test Level 4	30 V - 3 V - 30 V
Output Impedance	50 Ω±10%
Total Harmonic Distortion	< 1% (sine wave)
Differential-mode Voltage Disturbance Test
Frequency Range	2 kHz ~ 150 kHz
Waveform	Sine wave, total harmonic distortion < 5%
Open-circuit Voltage	0.1 V ~ 20 V
Load Impedance	10 Ω±30%
Differential-mode Current Disturbance Test
Frequency Range	2 kHz ~ 150 kHz
Max. Current	5 A
BNC Output	10:1（0.1 V/A）
Load Impedance	10 Ω ±0.3Ω

General Parameters

Accessories

Optional Accessories

1	Coupling Network	Model: CN 416M2/M3-32 EUT voltage rating: Single-phase 2-wire or 3-wire, 32 A, 250 V AC/DC Test voltage range: DC ~ 300 V Frequency: DC (16^2/3 Hz, 50 Hz, 60 Hz) 2 kHz~150 kHz
2	Coupling Network	Model: CN 416M4N-32 EUT voltage rating: Three-phase 4-wire, L-G, 250 V AC/DC Test voltage range: DC ~ 300 V Frequency: DC (16^2/3 Hz, 50 Hz, 60 Hz) 2 kHz ~ 150 kHz
3	Coupling Network	Model: CN 416M5-32 EUT voltage rating: Three-phase 5-wire, L-G, 250 V AC/DC Test voltage range: DC ~ 300 V Frequency: DC (16^2/3 Hz, 50 Hz, 60 Hz) 2 kHz ~ 150 kHz
4	Coupling/Decoupling Network	Model: CDN 416T2 Frequency: 2 kHz ~ 150 kHz Number of lines: 2 Max. current: 0.5 A Max. voltage: AC 150 V, DC 200 V Connector type: Terminal block
5	Coupling/Decoupling Network	Model: CDN 416T4 Frequency: 2 kHz ~ 150 kHz Number of lines: 4 Max. current: 0.5 A Max. voltage: AC 150 V, DC 200 V Connector type: Terminal block
6	Coupling Network	Model: CDN 416T8 Frequency: 2 kHz ~ 150 kHz Number of lines: 8 Max. current: 0.5 A Max. voltage: AC 150 V, DC 200 V Connector type: Terminal block
7	Coupling/Decoupling Network	Model: CDN 419M3-32 EUT voltage rating: Single-phase 3-wire, 32 A, 250 V AC/DC Frequency: 2 kHz ~ 150 kHz
8	Coupling/Decoupling Network	Model: CN 419M4N-32 EUT voltage rating: Three-phase 4-wire, 32 A, L-G, 250 V AC/DC Frequency: 2 kHz ~ 150 kHz
9	Coupling Network	Model: CN 14598-19 Max. EUT voltage: 250 V AC Max. EUT current: 32 A
10	Isolation Transformer	Configuration can be selected according to the power rating of single-phase or three-phase power supply chosen by customers. It is applied to coupling and decoupling waveform tests.
11	CoreLab Immunity Test Software	Support Windows 7/8/10 /11; Support Ethernet Interface; Support sequence test, easy to operate, generate and export test report.
12	Differential Mode Current Test Module	Model: WCT 20 Frequency: 2 kHz ~ 150 kHz Max. current: 5 A Max. voltage: less than 22 V Impedance: 1 Ω±0.3 Ω
13	Differential Mode Current Test Module	Model: R419-10 Resistance: 10 Ω
14	Differential Mode Current Test Module	Model: RJJF-100 Resistance: 100 Ω
15	Balanced-Unbalanced Impedance Converter	Model: Balun 50/10 Characteristic impedance: 50 Ω / 10 Ω Frequency: 2 kHz ~ 150 kHz Max. input voltage (Vpp): 400 V