Electrostatic Discharge Simulator

EDS 30V

Request a Quote Add to Compare Add to Quote List

Introduction

The EDS 30V is an intelligent electrostatic discharge (ESD) generator complies with international automotive electronic standards such as ISO 10605, while also supporting general electrostatic discharge test standards such as IEC 61000-4-2. The simulator can accurately simulate and generate discharge pulses with an output voltage of up to 30 kV.

The EDS 30V features an LCD touch screen for simple and easy operation. The power supply can be selected between AC and a battery pack, and a built-in thermo-hygrometer ensures reliability across a wide range of testing environments.

Features

> Ergonomic design

> LCD touchscreen control

> Temperature and humidity recording and protection

> Automatic polarity switching

> Replaceable RC module with automatic identification

> Built-in standard test program library

> Intelligent detection of air discharge failure

> Max. test voltage 30 kV

Standards

IEC Standards

ISO Standards

ISO 10605

GB/T Standards

Other Standards

View All Standards

Application Areas

Specification

Technical Parameters

Contact Discharge	200 V ~ 30,000 V（±5%）
Air Discharge	200 V ~ 30,000 V（±5%）
Voltage Step	100 V
Holding Time	＞ 5 s
Charging Resistor	51 MΩ
Polarity	+, -
RC Module Identification	Automatic identification and LCD display
Temperature and Humidity	Built-in thermo-hygrometer with record and protection functions
Frequency	Single, 0.1 Hz, 0.2 Hz, 0.5 Hz, 1 Hz, 2 Hz, 5 Hz, 10 Hz and 20 Hz
Trigger Mode	Automatic, manual
Counter	1~9,999
Contact Discharge Mode	330 pF/ 2,000 Ω 150 pF/ 2,000 Ω 330 pF/ 330 Ω 150 pF/ 330 Ω
Rise Time	0.7 ~ 1 ns

General Parameters

Accessories

Standard Accessories

1	RC Module	Model: EDS 30T-RC(150pF/ 330 Ω) Model: 330 pF/ 2,000 Ω (EDS) Model: 150 pF/ 2,000 Ω(EDS) Model: 330pF/ 330 Ω(EDS)
2	Discharge Tip	Model: EDS 20H-CONT (330 Ω) Contact discharge tip
3	Discharge Tip	Model: EDS 20H-CONT (2,000 Ω) Contact discharge tip
4	Discharge Tip	Model: EDS 30T-AIR (V2.0) Air discharge tip
5	Grounding Cable	2 m
6	Package	Carrying case
7	Factory Report
8	User Manual

Optional Accessories

1	RC Module	100 pF/1,500 Ω (EDS) 150 pF/150 Ω (EDS) 500 pF/500 Ω (EDS) 500 pF/5,000 Ω (EDS) 200 pF/0 Ω (EDS) 500 pF/0 Ω(EDS) 500 pF/100 Ω (EDS) Customizable RC modules according to user needs









		Can be customized upon request
2	Discharge Tip	Model: EDS 30T-AIR (30 mm) For tests from 15 kV to 30 kV
3	Battery Pack	Model: EDS01 8 x 2,600 mAh Ni-MH rechargeable batteries alternative to AC power Operating time: 8h (+30 kV, 1 Hz) Dimension: 140 mm100 mm35 mm Weight: 0.5 kg
4	Battery Charger	Model: ACS310 For charging battery pack
5	PC Communication	Model: EDS-REMOTE Fiber optic to USB converter
6	Fiber Optical Cable	Model: HFBR4503-4513 Used with EDS-REMOTE to enable remote control of the instrument via PC software. Cable length: 10 m.
7	Control software	Model: Corelab > Compatible with Windows 7/8/10 operating systems. > Supports Ethernet interface and serial communication modes. > Supports parameter scheduling tests and test sequences, allowing one-click test execution with simple operation. > Allows customer information configuration, automatically generates test reports, and supports report export for convenient recording of real-time test data.
8	Electrostatic Discharge Test Setup	Model: ESDD VCP (ESD-DZ): 5005003 mm HCP (ESD-DZ): 1,6008002 mm GRP (ESD-CD): 2,7001,8002 mm Insulating mat: 1,6008000.5 mm Discharge cable: ES 470-1.4 (1.4 m), ES 470-1.7 (1.7 m)
9	EDS Calibration Fixture	Model: ESDD-B Note: Complies with ISO 10605:2023.
10	EDS Calibration Fixture	Model: ESDD-D Note: Complies with IEC 61000-4-2:2025
11	Electrostatic Dissipative Mat	Model: ESD-DM Resistance: 10⁸ Ω/square Dimension: 1,000 mm1,000 mm2.5 mm
12	Insulating Mat	Dimensions: 2,000 mm1,000 mm2 mm
13	ESD calibration device	Model: ESD-CALA Used for waveform calibration of IEC / EN 61000 - 4 - 2, including 2 Ω target, 1 m coaxial cable
14	Attenuator	Model: JZ602 Impedance: 50 Ω Attenuation: 20 dB
15	Attenuator	Model: JZ603 Impedance: 50 Ω Attenuation: 30 dB
16	High Voltage Divider	Model: EDS-HVM30 Used to measure the output voltage of the EDS in air discharge mode. Test Voltage: Max. 30 kV Impedance: 20 GΩ // 3 pF Attenuation Ratio: 20651:1 (Reference Value)

Request a Quote

Interested in our products? Leave us a message, and our team will get back to you soon!

Prev: Electrostatic Discharge Simulator Next: Handheld ESD Simulator Back to list

Weight	Approx. 12 kg
Weight (ESD Gun)	Approx. 2.0 kg
Operation Power Supply	100 V ~ 240 V (±10%); 50/ 60 Hz
Ambient Temperature	5℃ ~ 40℃
Relative Humidity	20% ~ 80%
Atmospheric Pressure	86 kPa ~ 106 kPa

Electrostatic Discharge Simulator EDS 30V

Electrostatic Discharge Simulator

EDS 30V