Signal/Data Line Failure Simulator

DFS 4002A

The DFS 4002A signal/data line faulure simulator complies with the test requirements of LV 124 pulses E10, E13, and E14, as well as LV 148 pulse E48-09, which are commonly used by German automotive manufacturers.

Download Datasheet

Request a Quote Add to Compare Add to Quote List

Introduction

The DFS 4002A provides a 16-channel programmable switching system, with each channel supporting a rated current range of 100 μA to 2 A.

Optional Accessories:

测试连接示意图.png

Features

> Equipped with 100 A power line switches and 2 A signal/data line switches

> Provides 16 independent switchable channels with programmable selection of test channels

> Independent grounding circuit

> Rise/fall time: <1 μs

Standards

Other Standards

Application Areas

Automotive Electronics

Specification

Technical Parameters

Channels	16 independent switchable channels, with programmable selection of test channels
DUT Voltage	Max. ±60 V DC
DUT Current	100 μA ~ 2 A per channel (at 25 °C)
Current Direction	Bidirectional
Repetition Rate	0.001 s to 99.9 s (customizable)
Rise and Fall Time	<1 μs (@1 kΩ; @1 Ω, V = 2 V)
Switch Impedance	<500 mΩ
Interruption Time	1 μs (10% ± 1 μs) (customizable)
Synchronized Test	Can be synchronized with PFS 60xxA power failure simulators, with synchronization error ≤1 μs
Peak Current	5 A

General Parameters

Accessories

Standard Accessories

Main Unit, Power Cord, User Manual

Request a Quote

Interested in our products? Leave us a message, and our team will get back to you soon!

Prev: Automotive Power Failure Simulator Next: None Back to list

Controller	Shared with PFS 60xxA
Screen	5.7-inch TFT touchscreen
Working Power	AC 110 V/220 V ±10%, 50/60 Hz ±5%
Max. Power Consumption	200 W
Dimension	19-inch / 4U
Weight	Approx. 18 kg
Ambient Temperature	15 ~ 35 °C
Relative Humidity	45% ~ 75%
Atmospheric Pressure	86 kPa ~ 106 kPa

Signal/Data Line Failure Simulator DFS 4002A

Signal/Data Line Failure Simulator

DFS 4002A