Electrostatic Sensitivity Tester for Electric Initiating Explosive Device

EDS 30S

The accidental explosion of electric initiating explosive device is caused by static electricity spark with certain energy imposed on electric initiating explosive device.

Request a Quote Add to Compare Add to Quote List

Introduction

The accidental explosion of electric initiating explosive device is caused by static electricity spark with certain energy imposed on electric initiating explosive device. The influence of static electricity to the electric explosive device can be regarded as a capacitor charged to a certain voltage, then the capacitor discharges to electric initiating explosive device through specified resistance. Electrostatic sensitivity test for electric initiating explosive device is to measure the fire rate or fire voltage (energy) under specified condition.

EDS 30S is designed according to GJB 736.11:1990, which is used to measure the relative sensitivity of electric initiating explosive device to electrostatic spark discharge so as to determine its safety.

Features

> 5.7-inch color touch screen front panel operation

> Equipped with test setup including explosion box and switch box etc.

Standards

GJB Standards

GJB 736.11

Other Standards

WJ/T 9042

Application Areas

Military

Specification

Technical Parameters

Output Voltage	10 V ~ 30 kV
Tolerance range	± 5%± 2 V
Polarity	+, -, first + than -
Pulse Time	10 s ~ 99 s
Pulse Count	1 ~ 99
Trigger Mode	Auto, manual, external trigger
Charging Capacitance	500 pF/2 nF ±5%
Series Discharge Resistance	500 Ω/5,000 Ω/0 Ω ±5%

General Parameters

Accessories

Standard Accessories

User manual, Test Cable, Power Cord, Flat Grounding Wire, Fuse, Plug Alligator Clips, Explosion Box (Model EDS 30S-EP BOX), Switch Box (Model EDS 30S-SWBOX), High Voltage Meter Q3-V, Capacitance Modules (500 pF, 2 nF), Resistance Modules (500 Ω, 5,000 Ω, 0 Ω)

Request a Quote

Interested in our products? Leave us a message, and our team will get back to you soon!

Prev: Electrostatic Discharge Simulator Next: None Back to list

Working Power	AC 110 V/220 V (±10%), 50/60 Hz
Fuse	6 A
Max. Power Consumption	100 W
External Trigger Input	BNC interface, 5V TTL, normally open contact, trigger by closing
Dimensions	4U rack, 450 (W) 190 (H) 620 (D) mm
Weight	Approx. 15 kg
Ambient Temperature	15℃ ~ 35℃
Relative Humidity	45% ~ 75%
Atmospheric Pressure	86 kPa ~ 106 kPa

Electrostatic Sensitivity Tester for Electric Initiating Explosive Device EDS 30S

Electrostatic Sensitivity Tester for Electric Initiating Explosive Device

EDS 30S