Ring Wave Coupling/Decoupling Network

RWPN 6916TUL

The RWPN 6916TUL ring wave coupling/decoupling network provides complies with IEC/EN 61000-4-12 and UL 60730-1.

Request a Quote Add to Compare Add to Quote List

Introduction

The RWPN 6916TUL ring wave coupling/decoupling network provides complies with IEC/EN 61000-4-12 and UL 60730-1. It is fully automatic three-phase coupling/decoupling function and is designed for use with the RWS 600 series simulator.

The RWPN 6916TUL supports EUT with a Max. load capacity of AC 690 V 16 A three-phase five-wire system. Other EUT voltage and current ratings can be customized according to customer requirements.

Features

> EUT AC load capacity AC 690 V 16 A, three-phase five-wire

> EUT power supply automatic switching

> Test parameters such as test voltage, polarity and phase synchronization angle can be scheduled for fully automatic network switching

> Arbitrary phase angle superposition on any line

Standards

IEC Standards

IEC 61000-4-12

GB/T Standards

GB/T 17626.12

EN Standards

EN 61000-4-12

Application Areas

Specification

Technical Parameters

Three-Phase Automatic CDN	Complies with EN/IEC 61000-4-12, GB/T 17626.12 and UL 60730-1 Ring wave test with test voltage up to 6.0 kV Note: The actual pulse voltage output of the CDN depends on the setting value of the pulse generator.
Phase Synchronization	Arbitrary phase angle superposition between any line-to-line or line-to-ground combinations of L1, L2, L3, N and PE
Coupling Path	Any combination of L1, L2, L3, N and PE coupling paths
Coupling Switching Mode	Automatic switching with test sequence scheduling function
Coupling Capacitor	3 μF
Coupling Resistor	5 Ω, 12 Ω, 27.5 Ω, 30 Ω The coupling resistance can be selected according to IEC standard values or customized values. The impedance depends on the internal resistance of the generator.
Coupling Attenuation	< 2 dB
Residual Voltage of EUT Input Port	<15% of the applied test pulse voltage or twice the rated peak voltage of the CDN

General Parameters

Accessories

Standard Accessories

Three-core Power Cord, Test Cable, Grounding Wire, Fuse, Coaxial Cable, User Manual

Optional Accessories

Request a Quote

Interested in our products? Leave us a message, and our team will get back to you soon!

Prev: Ring Wave Simulator Next: None Back to list

EUT Load Capacity	Max. AC 690 V 16 A, 50/60 Hz, three-phase five-wire
EUT Power Supply Switching Method	Automatic switching
Working Power	AC 110 V/220 V ±10%, 50/60 Hz ±5%
Fuse	6 A
Max. Power Consumption	200 W
Auxiliary Connector	D-sub 25p
Working Status Indication	LED indication on the front panel
Grounding Method	Flat grounding wire
Dimension	6U rack: 620 (L) * 450 (W) * 280 (H) mm
Weight	Approx. 30 kg
Ambient Temperature	15℃ ~ 35℃
Relative Humidity	45% ~ 75%
Atmospheric Pressure	86 kPa ~ 106 kPa

1	Combination Lightening Surge Simulator	Model: CWS 600 Series Standard compliance: IEC 61000-4-5 Max. output pulse voltage: 6.0 kV(1.2/50 μs), 3.0 kA(8/20 μs)
2	Combination Lightening Surge Simulator	Model: CWS 800 Series Standard compliance: IEC 61000-4-5 Max. output pulse voltage: 8.0 kV(1.2/50 μs), 4.0 kA(8/20 μs)
3	Compact Combination Simulator	Model: CCS 600 Series Standard compliance: IEC 61000-4-5 Max. output pulse voltage: 6.0 kV(1.2/50 μs), 3.0 kA(8/20 μs) Standard compliance: IEC 61000-4-4 Max. output pulse voltage: 4.8 kV
4	High-Voltage Differential Probe	Model: VCF-80 Max. test voltage: 8 kV Attenuation ratio: 1,000:1 Complies with the open-circuit voltage waveform calibration requirements for combination lightening surge simulators.
5	High-Voltage Current Sensor	Model: TR5025 Max. test current: 20 kA Attenuation ratio: 100:1 Complies with the short-circuit voltage waveform calibration requirements for combination lightening surge simulators.
6	EFT/Burst Simulator	Model: EFT 500x Standard compliance: IEC 61000-4-4 Max. output pulse voltage: 4.8 kV
7	EFT/B Calibration Kit	Model: TFB 500 Output/Input impedance: 50 Ω/50 Ω Attenuation: 55 dB Model: TFB 1000 Output/Input impedance: 1,000 Ω/50 Ω Attenuation: 60 dB (Incl. TFB 50 / TFB 1000, network port adapters and a carrying case. calibration for EFT/B tests.

Ring Wave Coupling/Decoupling Network RWPN 6916TUL

Ring Wave Coupling/Decoupling Network

RWPN 6916TUL