Magnetic Field Module

MFT Series

MFT series magnetic field module is designed to conduct immunity tests for electrical and electronic products according to IEC 61000-4-8 and GB/T 17626.8.

Download Datasheet

Request a Quote Add to Compare Add to Quote List

Introduction

MFT series magnetic field module is designed to conduct immunity tests for electrical and electronic products according to IEC 61000-4-8 and GB/T 17626.8.

It can simulate magnetic field conditions in residences, commercial areas, industrial sites, power plants and medium/high-voltage substations.

Features

> Support electromagnetic relay protection against overvoltage and overcurrent

> Support overtemperature protection

> Support test sequence function via Autolab software

> Ethernet RJ45 interfaces for PC remote control and test reports printing

Standards

GB/T Standards

GB/T 17626.8

EN Standards

EN 61000-4-8

Application Areas

Specification

Technical Parameters

Magnetic Field Strength	MFS 400 + MFT 400 (Matched with magnetic field coil TCXS111)	1 A/m ~ 400 A/m 1.26 μT ~ 504 μT
	MFS 1200 + MFT 1200 (Matched with magnetic field coil TCXS113)	1 A/m ~ 1,200 A/m 1.26 μT ~ 1,512 Μt
Output Accuracy	Error: < 1 dB of set output ultra-low value (e.g.1 A/m) needs manual calibration
Current Waveform	50 Hz/60 Hz, sine wave
Current Total Harmonic Distortion	< 5%
Waveform Repetition	1 s ~ 9,999 s
MFS 400 Test Duration	1 A/m ~ 100 A/m (continuous) 100 A/m~ 400 A/m (short duration 1 s ~10 s)
MFS 1200 Test Duration	1 A/m ~ 400 A/m (continuous) 400 A/m~ 1,200 A/m (short duration 1 s ~10 s)
Trigger Mode	Automatic, manual, external signal trigger
Coil Dimension	1 m*1 m or other sizes
Coil Shape	Rectangular or other types
Coil Turns	Single-turn or three-turn

General Parameters

Accessories

Optional Main Unit

1	Combined Immunity Tester	Model：CCS 600x In compliance with IEC 61000-4-8 Max. field strength: 400 A/m (continuous) Max. filed strength: 1,200 A/m (short duration)
2	Magnetic Field Simulator	Model: MFS 400 Match with MFT 400 and TCXS111 Max. field strength: 100 A/m (continuous) Max. filed strength: 400 A/m (short duration)
3	Magnetic Field Simulator	Model: MFS 1200 Match with MFT 1200 and TCXS113 Max. field strength: 400 A/m (continuous) Max. filed strength: 1,200 A/m (short duration)

Optional Accessories

Standard Accessories

Test Cable, User Manual, Power Cord, Ground Wire, Parallel Cable, Fuse

Optional Module

1	MFT 400	Max. magnetic field strength: 400 A/m
2	MFT 1200	Max. magnetic field strength: 1,200 A/m

Related Recommendations

Request a Quote

Interested in our products? Leave us a message, and our team will get back to you soon!

Prev: Power Failure and Magnetic Field Module Next: Coupling/decoupling Networks for EFT/Burst and Surge Immunity Tests Back to list

Working Power	AC 220 V, ± 10%，50 Hz /60 Hz
Fuse	6 A
Max. Power Consumption	100 VA
Auxiliary Interface	D-sub 25pin
Working Status Indication	Front panel LED indication
Grounding Method	Flat grounding wire
Dimension	6 U rack, 450 mm(W)280 mm(H)620 mm(D)
Weight	Approx. 70 kg
Ambient Temperature	15 ℃ ~ 35 ℃
Relative Humidity	45% ~ 75%
Atmospheric Pressure	86 kPa ~ 106 kPa

1	Magnetic Field Coil	Model: TCXS 111 Magnetic field strength: 1 A/m ~ 400 A/m (1.26 μT ~ 504 μT) Coil factor (typical): 0.87 Number of turns: Single turn Magnetic field orientation: 90°/180° Max. continuous current: AC 120 A Test duration: ≤100 A/m: continuous operation for 8 h; >100 A/m: short-term operation for 10 s Frequency: 50 Hz/60 Hz Coil dimensions: 1 m (D)1 m (W) Overall dimensions (incl. mounting shaft): 1,400 mm (D) × 1,000 mm (W) Coil height adjustment range: 500 mm Package dimensions: 1,500 mm(D)1,250 mm(W)*200 mm(H) Weight: Approx. 10 kg
2	Magnetic Field Coil	Model: TCXS 113 Magnetic field strength: 1 A/m ~ 1,200 A/m (1.26 μT ~ 504 μT) Coil factor (typical): 0.87 Number of turns: three-turn Magnetic field orientation: 90°/180° Max. continuous current: AC 460 A Test duration: ≤400 A/m: continuous operation for 8 h; >400 A/m: short-term operation for 10 s Frequency: 50 Hz/60 Hz Coil dimensions: 1 m (D)1 m (W) Overall dimensions (incl. mounting shaft): 1,400 mm (D)1,000 mm (W) Coil height adjustment range: 500 mm Package dimensions: 1,350 mm(D)1,100 mm(W)100 mm(H)
3	Immunity Test Software	Model: CoreLab > Compatible with Windows 7/8/10/11 > Support Ethernet and serial communication > Support scheduled tests, test sequences, and one-click operation > Support customer information settings, automatic report generation and printing

Magnetic Field Module MFT Series

Magnetic Field Module

MFT Series