High frequency recommended vocabulary
ETS 160W3 is a testing system designed according to the standards DO-160G S22 and MIL-STD-461G, which can meet the testing requirements of waveform 3 (1 MHz and 10 MHz), and can perform cable bundle testing of level 5 as required by the standard.
ETS 160W3 is a testing system designed according to the standards DO-160G S22 and MIL-STD-461G, which can meet the testing requirements of waveform 3 (1 MHz and 10 MHz), and can perform cable bundle testing of level 5 as required by the standard. In addition, it meets the voltage requirements of level 5 under load.
When flying in severe convective weather, airplanes are often affected by lightning strikes, which generate transient induced voltage or current on the circuits or cables of onboard equipment, known as indirect lightning effects. This phenomenon may cause the aircraft to lose control and even lead to serious accidents such as a fire on the aircraft fuselage. For safety reasons, onboard equipment must undergo lightning protection design and testing verification to ensure that critical systems and equipment on board can still function properly after exposure to lightning environments, without affecting the continuous safe flight of the aircraft.
> 5.7-inch color touch screen control, simple and intuitive interface operation
> Can be remotely controlled with CoreLab software
> Supports cable bundle test level 5 requirements, with an output voltage of up to 5 kV
> Meet W3 voltage waveforms of 1 MHz and 10 MHz
> Can be used in various complex testing environments (such as on-site testing).
The coupler with a 3-meter-long load meets the requirements of Test Level 5
(maximum output voltage up to 4 kV)
Phone: +86-512-68413700
Email: info@3ctest.cn
Address：No.99 E'meishan Rd, SND, Suzhou, Jiangsu, 215153, China，Suzhou, Jiangsu, 215153, China
© 2025 Suzhou 3CTEST
Leave a Message
