Automotive Power Failure Simulator

PFS 60xxA1 Series

The PFS 60xxA1 series power fail simulator can be used for simulating events such as contact faults and line faults or relay-contact bounce in compliance with VW 80000, GMW 3172, LV 124 etc.

Download Datasheet

Request a Quote Add to Compare Add to Quote List

Introduction

The PFS 60xxA1 series power fail simulator can be used for simulating events such as contact faults and line faults or relay-contact bounce in compliance with VW 80000, GMW 3172, LV 124 etc. The equipment integrates 2 semiconductive solid-state electric switches, which can realize the rise or fall time being less than 1 μs or 200 ns. The selection of low and high impedance can better simulate the power fail phenomenon in real site.

Test Setup

Naming Rules：

Features

> 5.7-inch color TFT touch screen

> Support brief interruption tests

> Switching time: ≤200 ns (GMW3172 Clause 9.2.18); ≤1 μs (LV 124, VW 80000)

> 2 switch channels: DC+ power cord switch, DC- grounding wire switch

> Support test voltage DC 0 ~ 80 V

Standards

AutomotiveI Standards

Application Areas

Automotive Electronics

Specification

Technical Parameters

Input Voltage	0 ~ 80 V
Switches	Two switch channels: DC+ for power cord, DC- for grounding wire
Switches Impedance	DC+ for power cord: ＜50 mohm DC- for grounding wire: ＜50 mohm
Rated Current	PFS 6050A1: 50 A PFS 60100A1: 100 A
Switching Time	≤200 ns (GM3172 9.2.18) ≤1 μs (LV124, VW 80000)
Output Impedance	High impedance / Low impedance
Duration Time for Interruption(t_d)	1 μs ~ 1 s
Repetition Time	1 ms ~ 99.9 s
Trigger Mode	Automatic and manual

General Parameters

Accessories

Standard Accessories

User Manual, Test Cable, Fuses, Grounding Wire, Calibration Resistors PFS-R1Ω, PFS-R10Ω, PFS-R100Ω, PFS-R1000Ω

Optional Accessories

Request a Quote

Interested in our products? Leave us a message, and our team will get back to you soon!

Prev: Signal Line Fault Simulator DFS 5005A Next: Automotive Power Failure Simulator Back to list

Display Screen	5.7-inch TFT touch screen
Working Power	AC 110/220 V, ± 10%, 50 Hz/60 Hz
Dimension	19-inch/ 4U rack, 450 (W) ×190 (H) × 620 (D) mm
Weight	PFS 6050A1: 17 kg PFS 60100A1: 17.3 kg
Ambient Temperature	15 ℃ ~ 35 ℃
Relative Humidity	45% ~ 75%
Atmospheric Pressure	86 kPa ~ 106 kPa

1	Remote Control Software	Model: AutoLab > Support Windows 7/8/10/11 operating systems > Supports Ethernet > Supports scheduling and test sequence, easy for operation > Supports single test and sequence test reports printing, and user-defined templates > Supports emergency stop for safe test
2	Signal/Data Line Failure Simulator	Model: DFS 4002A Complies with test requirements for pulse E10, E13, E14 per LV 124 and pulse E48-09 per LV 148 (German OEM specification).

Automotive Power Failure Simulator PFS 60xxA1 Series

Automotive Power Failure Simulator

PFS 60xxA1 Series