Handheld ESD Simulator

EDS 16H

The EDS 16H is an intelligent electrostatic discharge (ESD) generator designed to meet the IEC 61000-4-2 testing standard, accurately simulating electrostatic discharge pulse up to 16.5 kV.

Download Datasheet

Request a Quote Add to Compare Add to Quote List

Introduction

The EDS 16H is an intelligent electrostatic discharge (ESD) generator designed to meet the IEC 61000-4-2 testing standard, accurately simulating electrostatic discharge pulse up to 16.5 kV.

The EDS 16H features an ergonomic design and can be powered by either batteries or an AC adapter. Its user-friendly LCD touchscreen, and built-in temperature and humidity sensors ensure reliable performance across a wide range of testing environments.

Features

> Ergonomic design;

> LCD touchscreen control;

> Temperature and humidity recording and protection;

> Automatic polarity switching;

> Customized RC modules are available;

> Built-in standard test program library;

> Intelligent detection of air discharge failure;

> Built-in battery pack, long-duration battery test support;

> Max. test voltage 16.5 kV;

> Equipped with two batteries;

Standards

IEC Standards

ISO Standards

ISO 14304

GB/T Standards

GB/T 17626.2

EN Standards

ITU Standards

ITU-T K.20

Other Standards

Bellcore GR-1089-Core

View All Standards

Application Areas

Specification

Technical Parameters

Contact Discharge	1,000 V ~ 16,500 V（±5%）
Air Discharge	1,000 V ~ 16,500 V（±5%）
Voltage Step	100 V
Holding Time	＞ 5 s
Charging Resistor	51 MΩ
Polarity	+, -
RC Module Identification	Automatic identification and LCD display
Temperature and Humidity	Built-in thermo-hygrometer with record and protection functions
Frequency	Single, 0.1 Hz, 0.2 Hz, 0.5 Hz, 1 Hz, 2 Hz, 5 Hz, 10 Hz and 20 Hz
Trigger Mode	Automatic, manual
Counter	1~9,999
Contact Discharge Mode	150 pF/ 330 ohm
Rise Time	0.8 ns ± 25%

General Parameters

Accessories

Standard Accessories

1	Battery Module	Model: EDS 20H-BAT 6 x 2,600 mAh Ni-MH rechargeable battery
2	Power Adapter	Model: EDS 20H-ACDC Can replace battery module
3	RC Module	Model: 20C150R330 150 pF/ 330 Ω
4	Discharge Tip	Model: EDS 20H-CONT Contact discharge tip
5	Discharge Tip	Model: EDS 20H-AIR Air discharge tip
6	Grounding cable	2m
7	Package	Carrying case
8	Factory report
9	User Manual

Optional Accessories

Request a Quote

Interested in our products? Leave us a message, and our team will get back to you soon!

Prev: Handheld ESD Simulator Next: Electrostatic Discharge Simulator Back to list

Weight	Approx. 8.5 kg
Weight (ESD Gun)	Approx. 1.8 kg
Operation Power Supply	100 V ~ 240 V (±10%); 50/ 60 Hz
Ambient Temperature	15℃ ~ 35℃
Relative Humidity	30% ~ 60%
Atmospheric Pressure	86 kPa ~ 106 kPa

1	RC module	150 pF/ 2,000 Ω(EDS) 330 pF/ 2,000 Ω(EDS) 330 pF/ 330 Ω(EDS) 100 pF/ 1,500 Ω(EDS) 150 pF/ 1,50 Ω(EDS) 500 pF/ 500 Ω(EDS) 500 pF/ 5,000 Ω(EDS) 200 pF/ 0 Ω(EDS) 500 pF/ 0 Ω(EDS) 500 pF/ 100 Ω(EDS) Customizable discharge module upon request
2	Electrostatic Discharge Test Setup	Model: ESDD Grounding high voltage resistor: 2 x 470 kohm VCP: 500 x 500 mm HCP: 1,600 x 800 mm GRP: 2,700 x 1800 mm Wooden test table: 1,600 x 800 x 800 mm Standard: IEC 61000-4-2
3	ESD校准装置 EDS CALA	Model: EDS CALA Used for waveform calibration of IEC / EN 61000-4-2, including 2 ohm target / 4 GHz coaxial cable, user manual
4	Attenuator	Model: JZ602 Impedance: 50 ohm Attenuation: 20 dB
5	Attenuator	Model: JZ603 Impedance: 50 ohm Attenuation: 30 dB
6	PC Communication	Model: EDS - REMOTE Supply with fiber optic cable (Model: HFBR4503-4513, length 10 m)
8	PC software	Model: CoreLab > Compatible with Windows 7/8/10 operating systems >Supports Ethernet and serial communication modes > Supports parameter scheduling, test sequences, and one-click testing for easy operation >Allows configuration of customer information, automatically generates test reports, and supports report export, making it convenient for users to record real-time data

Handheld ESD Simulator EDS 16H

Handheld ESD Simulator

EDS 16H