High frequency recommended vocabulary
GJB 151C is the current edition of the Chinese national military standard for the electromagnetic emission and susceptibility requirements of military equipment and subsystems, issued in January 2025 with effect from March 2025 and replacing the previous edition. It retains the structure of its predecessor, in which twenty-one numbered test items are grouped into conducted emission, conducted susceptibility, radiated emission and radiated susceptibility, and it gives the limit or the applied level, the frequency range, the test set-up and the measurement procedure for each. The most significant addition is the conducted susceptibility item CS117, which addresses the transients induced in aircraft and equipment cable runs by a lightning strike and which brings the standard into line with the corresponding requirement in the United States military standard. Because the edition changes the applicable test programme, equipment qualified under the earlier edition must be reassessed against the items that have been added or modified.
The BCICF-500 broadband current injection calibration fixture is designed for calibration tests of current injection clamps and current measuring probes, serving as a broadband signal transmission and coupling device. I
The LISN ML 600S line impedance stabilization network is designed according to MIL-STD-461 and GJB 151.
The LISN ML 300HVS line impedance stabilization network is designed according to MIL-STD-461 and GJB 151.
The LISN ML 200HVS line impedance stabilization network is designed according to MIL-STD-461 and GJB 151. Designed for conducted emission test, it isolates power interference and provides the specified power impedance to EUT.
The J50 line impedance stabilization network complies to MIL-STD-461 and GJB 151. It isolates components from power supplies and measures interference of vehicles, vessels and internal combustion engines.
The LISN ML 100S line impedance stabilization network is designed according to MIL-STD-461 and GJB 151. Designed for conducted emission test, it isolates power interference and provides the specified power impedance to EUT.
The LISN ML 500HVS Line Impedance Stabilization Network is designed in accordance with GJB 151B and MIL-STD-461.
The LISN ML 500HVS line impedance stabilization network is designed according to GJB 151B/C and MIL-STD-461E.
The T-52 Current Monitor Clamp complies with MIL-STD-461H, RTCA DO-160G and GJB151C-2024, and is designed for measuring high-frequency AC current and time-domain pulse current under low-frequency and DC bias.
The T-57 Current Monitor Clamp complies with MIL-STD-461H, RTCA DO-160G and GJB151C-2024, and is designed for measuring high-frequency AC current and time-domain pulse current measurement under low-frequency and DC bias.
The EDS MAX30 is 3CTEST’s fourth-generation electrostatic discharge simulator in compliance with IEC 61000-4-2:2025, ISO 10605:2023 and other standards. This new product has a test voltage up to 30 kV
The EDS MAX30 is 3CTEST's fourth-generation electrostatic discharge simulator in compliance with IEC 61000-4-2:2025, ISO 10605:2023 and other standards.
The EDS MAX20 is 3CTEST's fourth - generation electrostatic discharge simulator in compliance with IEC 61000-4-2 and other standards.
The EDS MAX20 is 3CTEST’s fourth - generation electrostatic discharge simulator in compliance with IEC 61000-4-2 and other standards. This new product has a test voltage up to 20 kV and features 3.5-inch HD color screen, along with compact mechanical design, intuitive UI design, lightweight, and impeccable waveforms.
The EDS MAX16 is 3CTEST's fourth - generation electrostatic discharge simulator in compliance with IEC 61000-4-2 and other standards.
The EDS MAX16 is 3CTEST's fourth - generation electrostatic discharge simulator in compliance with IEC 61000-4-2 and other standards. This new product has a test voltage up to 17 kV and features 3.5-inch high - definition color screen,
• Using the product inquiry function can help you quickly learn about the product's price and other related information.
• You can either inquire about a single product directly, or select multiple products to add to the inquiry bar and inquire about them together.
• How to make an inquiry
1. Using the product comparison function can help you find the target product you need for selection more quickly and easily.
2. You can add up to 5 products for comparison. Product models and parameters may vary across different series. It is recommended to compare products within the same series.
3. How to use the comparison bar.
Phone: +86-512-68413700
Email: info@3ctest.cn
Address：No.99 E'meishan Rd, SND, Suzhou, Jiangsu, 215153, China，Suzhou, Jiangsu, 215153, China
© 2025 Suzhou 3CTEST
Leave a Message
