High frequency recommended vocabulary
ISO 10605 specifies the test methods used to evaluate the immunity of road vehicles to electrostatic discharge. Because a vehicle accumulates charge as it moves and because an occupant can carry several kilovolts when leaving the seat, discharge events occur in service at the moment a person touches the body, the door handle or a switch, and inside the vehicle when a passenger reaches for a control. The standard therefore defines two distinct levels of testing. At vehicle level, discharges are applied to the exterior of a complete vehicle and to the interior at points a person can actually touch, using a generator that represents the human body with a specified capacitance and series resistance. At component level, the modules and sensors used in the vehicle are tested with generators that model the different contact paths, including the unpowered handling case. Test severity levels are expressed as voltages, and the standard prescribes the test setup, the ground plane, the discharge tips and the criteria for judging performance.
The EDS MAX30 is 3CTEST’s fourth-generation electrostatic discharge simulator in compliance with IEC 61000-4-2:2025, ISO 10605:2023 and other standards. This new product has a test voltage up to 30 kV
The EDS MAX30 is 3CTEST's fourth-generation electrostatic discharge simulator in compliance with IEC 61000-4-2:2025, ISO 10605:2023 and other standards.
The EDS 30V is an intelligent electrostatic discharge (ESD) generator complies with international automotive electronic standards such as ISO 10605, while also supporting general electrostatic discharge test standards such as IEC 61000-4-2.
The EDS MAX30 is 3CTEST’s fourth-generation electrostatic discharge simulator in compliance with IEC 61000-4-2:2025, ISO 10605:2023 and other standards. This new product has a test voltage up to 30 kV
The EVM 30 High-Voltage Electrostatic Voltmeter complies with IEC/EN 61000-4-2 with high-performance and cost-effective.
The ESD-CALA calibration Kit complies with the requirements of IEC/EN 61000-4-2. It consists of BX602 calibration target, coaxial cables and adapters.
The EDS 30V is an intelligent electrostatic discharge (ESD) generator designed to meet the IEC 61000-4-2 testing standard, accurately simulating electrostatic discharge pulse up to 30kV.
The ESD-HVM30 high-voltage divider complies with the requirements of IEC/EN 61000-4-2.
• Using the product inquiry function can help you quickly learn about the product's price and other related information.
• You can either inquire about a single product directly, or select multiple products to add to the inquiry bar and inquire about them together.
• How to make an inquiry
1. Using the product comparison function can help you find the target product you need for selection more quickly and easily.
2. You can add up to 5 products for comparison. Product models and parameters may vary across different series. It is recommended to compare products within the same series.
3. How to use the comparison bar.
Phone: +86-512-68413700
Email: info@3ctest.cn
Address：No.99 E'meishan Rd, SND, Suzhou, Jiangsu, 215153, China，Suzhou, Jiangsu, 215153, China
© 2025 Suzhou 3CTEST
Leave a Message
